快活林性息

THIS USERS GUIDE PROVIDES GENERAL GUIDELINES AND PROCESSING PROCEDURES FOR ONLINE MASTER PAYROLL CERTIFICATION:

Process Prerequisites/Assumptions:

The Master Payroll Certification process complies with the State Administrative Manual requiring state agencies to maintain records of certification or approval for each salaried employee during each pay period. These records must be approved by authorized department Approvers, which indicates fiscal responsibility by the department budget for this payroll activity. Master Payroll Certification may impact the issuance of payroll warrants (pay checks) and is subject to State and local audits. Certification or approvals are required to be completed by the deadlines listed on the听. If certifications are not completed by deadline, salaried employee pay may not issue, or may not issue correctly.

Certification or approval of Master Payroll is the process of approving both attendance (number of days) and job information for each employee by authorized department Approvers for each pay period. This is a process that is different and separate from Time and Labor and Absence Management, which is record-keeping and approval of hourly paid time or leave time.

The Master Payroll Certification online page displays a list of active employees during a specific pay period. Current job information is reflective of any changes that have been received and processed in SOLAR HR since the last MPC cycle. The MPC page is updated twice a month, in two 鈥渞uns鈥� or snapshots of applicable employee job data during the pay period. These processes are known as the Initial Run and Final Run.

The Initial and Final Runs capture a snapshot of employee data as of the run date. This includes hires, separations, docks, leaves of absence without pay - any transaction that might affect whether a salaried employee is to be paid and for how many days and/or hours.

This also includes data that has been entered through the Part Time Faculty and Absence Management modules (dock time), as well as entries by HR staff from department submitted documentation. Documentation received later than the Initial and Final Run dates would not have been entered in the system and would not be reflected on the MPC page.

Department MPC Reviewers and Approvers must evaluate MPC for accuracy, approving only those rows of information that are correct. Approvers cannot self-approve (or self-certify), therefore there must be at least two Approvers for each department ID.

Both runs require attention by both the Reviewer and the Approver. After the Final Run, there is one business day to complete the certification process and submit any exception information to Payroll.

The MPC process for a specific pay period culminates when payroll issues for those employees for which Master Payroll Certifications were approved by their designated departments.

NOTE:听The terms 鈥�approve鈥� and 鈥�certify鈥� are used interchangeably throughout this document.

Campus departments are responsible for identifying individuals responsible to review and/or approve the Master Payroll.

Reviewers听have access to view Master Payroll data by department ID, as well as the capability to add comments to the MPC page. The Reviewer assists the Approver by evaluating attendance records (such as docked time) and change of employment transactions for employees within the department (e.g. hires, separations, etc.) to prepare data for certification. The Reviewer does not have access to approve MPC.

Approvers听are responsible to review, add comments, and approve employee data by department ID for each pay period. Individuals who key transactions into the Part Time Faculty module or is a Timekeeper for Time and Labor/Absence Management cannot concurrently be assigned as an MPC Approver. Approvers cannot certify their own records. Another Approver designee must certify. Approvers should plan in advance for transfer of responsibilities with alternate Approvers to cover scheduled time off. In the case of unforeseen circumstances, the department should contact Payroll at x2101.

All Time and Labor/Absence Management Timekeepers and Approvers听are automatically granted access to view MPC to the same departments they have access to for Time and Labor/Absence Management.

To obtain or delete access for identified roles, the department coordinator must submit a security request through the Applications Access Request module.

MPC activities occur each pay period and are indicated on the听听with symbols to indicate the dates of the Initial Run, Final Run, and last day to approve (also referred to as 鈥渃ertify鈥�).

Symbol definitions are listed to the left of the calendar:

Reviewers & Approvers can access the MPC page through the 快活林性息 Employee Portal.

Navigation:听>听HR > Time & Attendance
Reviewers听use the听View Master Payroll听link.
Approvers听use the听Certify Master Payroll听link.

听

The search page will display. Enter the department ID desired in the field marked Group ID, and the pay period end date if known as shown below.

If the Pay Period End Date is unknown, leave the field blank and click on the yellow Search button. A list of pay period end dates will show. Choose the latest date (top row) and the requested Master Payroll page will display.

Listed below are fields that are displayed on the MPC page along with the corresponding definitions.

Both Reviewers and Approvers are expected to verify the accuracy of the data displayed for their department(s) prior to approving each employee鈥檚 record.

This information is displayed in columns. The rows are listed alphabetically by employee last name, as shown below.

The MPC view contains multiple pages and filters to sort categories of certification.

When the page is accessed, the opening view is the Initial Run. The Run Date displays corresponding to the calendar date of the run process. If the Final Run has completed, there will be a second page to view. Click the right-facing arrow to view the Final Run page.

The Filtering Options offer views of selected data.听See filtering options and their functions explained in the table below.

When using the filtering features, return to the complete list by clicking the听Show All听button found at the bottom of the page.

The banner at the top of the information display includes other screens and methods for reviewing information.

In the example below, there are thirty-nine (39) employees listed for MPC, but only the first fifteen (15) are shown. Use the View All button to show all employees on one page, or move to the next set of 15 by clicking on the right pointing arrow.

Additionally there are two tabs shown in the display below the navigation banner.

The page defaults to the听MPWA Data tab听(Master Payroll Warrant Authorization).听
The听Comments tab听displays a subset of the MPWA Data (EmplID, Rcd, and Name) as well as the Comment field.

The grid-like, expandsion icon 听opens both the MPWA Data and Comments tabs simultaneously across one display (see below).

Another option for reviewing data is to download displayed data onto an Excel spreadsheet. Find and click on the download grid icon and a File Download window will appear to open or save the download.

听The page must be expanded to download data from both pages.

Note:听If your Internet browser has a pop-up blocker program enabled, hold down the control key while simultaneously clicking on the download icon to bypass the blocker.

听

Campus Approvers 鈥渃ertify鈥� or approve the employee records for their department(s) by placing a check mark in the column marked 鈥淐orrect鈥� on the Certify Master Payroll page.

The check mark is placed next to each employee鈥檚 name to indicate agreement that the employee should receive a pay warrant for that specific pay period within those specific job conditions as displayed (department ID, job code, hours worked, hours docked, etc.).

Approve听ONLY听when all information displayed is accurate.听If any one of the displayed pieces of information is NOT accurate, do NOT approve.听This does not mean that the employee will not receive pay; instead, it is an alert to Payroll to contact the department to determine the amount of time for which the employee is to be paid, when pay is due. It is also to determine if an employee is NOT due any pay for that pay period.

Employment conditions may possibly change from one pay period to the next. Employees may be placed on leaves of absence (paid or unpaid) or may be 鈥渄ocked鈥� for time not worked and without paid leave time. This may or may not occur with the first day of the pay period, and thus may only earn partial pay for the period. In many cases, these transactions are entered in time for the Master Payroll Certification Initial or Final Run, and are reflected in the MPC display by showing only a number of days to be paid.

Mid-Month Changes:

In other instances, reassignments from one department ID to another may display on MPC in one or the other department ID, depending on the date of the transaction entry and the date of MPC processing. If this type of transaction is not entered into the system in time for the MPC processes, the display will show a full or 鈥渟tandard鈥� pay warrant is scheduled for the employee in the former department. However, the Approver for the former department should NOT certify the employee鈥檚 information because it is not accurate. The new department should submit an exception form to Payroll because the employee was not listed on their MPC.

NOTE:听When reviewing MPC data, please pay special attention to non-typical employment situations. Use the Non-Standard filter to easily identify those individuals flagged to receive partial听or no pay. When using any of the filters, remember to use the 鈥淪how All鈥� button at the bottom of the page to display all the rows of information and ensure all rows have been reviewed.

1. Access the MPC page by visiting myNorthridge portal home page. From the Human Resources/Manager pagelet, click the appropriate link for your access as Reviewer (View Master Payroll) or Approver (Certify Master Payroll).

2. Enter a specific Department ID (in the field labeled Group ID) and pay period end date, then click the yellow Search button and the MPC page will display.

If the end date is unknown, leave blank and click on Search for a list of Pay Period End Dates. Click the desired date (blue and underlined) and the MPC page will display.

3. Verify the page is the Initial or Final Run by reviewing the Run Date.

4. Open the desired tab (MPWA Data, Comments, or both using the expansion icon听, and choose your viewing option (view all, or in groups of 15).

5. Evaluate each column of information per employee for accuracy, including whether the employee should receive a full or 鈥渟tandard鈥� pay warrant which is a full month鈥檚 pay.

6. Add comments in the open comment box when NOT approving, or to alert Payroll to additional information. Click on the Comments tab, or the expansion icon to display the comment field.

7. If satisfied with information displayed, Approvers must check mark the column labeled Correct for each employee. If the information is not correct, do not check mark the column labeled Correct.

1. If ALL employee information is correct, Approvers may use the yellow Certify All button at the bottom of the page.听CERTIFY ALL
2. Use the听DESELECT ALL听button to clear or undo the approval for all employees.
3. SAVE entries by clicking the yellow Save button.听听SAVE

听

Any displayed MPC information that is NOT accurate as of the current month is identified as an exception.听Approvers are not to approve any employees whose data is not accurate. Exceptions require the departments to enter brief explanations within the module in available comment boxes on the MPC display page.

In the example below, the Approver did NOT certify this employee鈥檚 information because the display indicates the employee worked 16 days, but the department records reflect only 15 days worked. Payroll will review this comment, and contact the department to clarify the proper pay this employee is to receive.

听

Employees whose names are听NOT听reflected on the display page and are expected to be paid require completion and submission of the听.听听The completed form is faxed to Payroll Administration at x5870.

Original MPC Exception Forms are to be retained within the department for a period of four years.

Additional assistance is available from Payroll at X2101.